AY ATTENTION:
How to choose the gain of Rx and Tx?1、If there is a long RF CABLE (over 5 meters) or power divider between the extender and the hotspot, it is recommended to use the combination of RX = 17, TX = 6;
2、 If there is nothing else between the extender and the hotspot directly, it is recommended to use RX =10, TX =0.
3、If you want to test the impact of different values RX/TX on the system, it is recommended to use the combination of RX = 17, TX = 6, and 3dB/6dB attenuator to adjust.
4、If you want to buy other gains of RX/TX combinations, please contact us
FEATURES
2.0dB ultra-low noise
Wide 6V to 18V operating input range
2.5*0.7mm DC
SPECIFICATION
|
Number |
Items |
Specifications |
|
1 |
Frequency Range |
863-870MHz |
|
2 |
Operating Voltage |
6-18V |
|
3 |
ReceivingGain |
17dB±1 |
|
4 |
Transmission Gain: |
6dB±1 |
|
5 |
Max Output Power(P1dB) |
|
|
6 |
Input Trigger Power |
Min:6dBm Max:20dBm |
|
7 |
EVM |
3%@27dBm |
|
8 |
Noise Figure |
＜2.0dB |
|
9 |
Current Supply |
300mA@Pout 30dBm 12V |
|
10 |
TX/RX Switch Time Delay |
＜1 us |
|
11 |
LED Indicator |
Transmitter: Green; Receiver: red |
|
12 |
OperatingTemperature |
-40℃～+70℃ |
|
13 |
StorageTemperature |
-40℃～+150℃ |
|
14 |
Operating Humidity |
Up to 95% rel. humidity |
|
15 |
RF Connector |
Input: SMA-Female; Output: RP-SMA-Female |
|
16 |
Power Socket |
2.5*0.7mm DC |
|
17 |
Shell Size |
64.5*34.5*10mm |
|
18 |
Shell Material |
Aluminum |
|
19 |
Net Weight |
0.05Kg |
INCLUDED
- 1PCS* AMPLIFIER
- 1PCS* DC POWER PLUG
- 1PCS*RG402 20CM Coaxial Cable 50ohm SMA Male to RP SMA MALE